Its operation consists in the detection of metallic bodies that can be mixed with good product.
When detecting one of these bodies, the detector coil located below the tape sends a signal to the control box or control box and to the power supply, thus activating both the acoustic and visual signal, to signal the detection of a material that does not correspond .
Two circuits, most often closed ones, free of potential, both opening instantly, independently of one another.
Tapes between 400 mm and 1,800 mm
On conveyor belts. It has a single detector coil to install under the band
Located in a carbon steel frame
Between 220 and 230 V / 50 Hz. For other voltages, it must be specifically requested
Of 100 W minimum
Metal free zone
250 mm metal free zone on the detector side
Work environment temperature
10º C to 50ºC
-10º C to 60ºC
IP54 control panel and IP67 detector coil
Painted carbon steel case RAL7032. Place in a protected place from the outside
It is not included in the equipment. 3 × 1 hose with shielded ground is recommended. The maximum distance between coil and frame must be 100 meters.