Relay stabilizers are designed to avoid voltage variations and extend the life of the devices by providing greater efficiency.
These relay stabilizers are designed primarily for domestic use, or any application where high precision is not required, but with the assurance of always being within acceptable margins. The low cost of this type of stabilizers makes it a very attractive product. We have a wide range of powers ranging from 0.5kVA to 5kVA.
|Input voltage correction range||130v – 250v|
|Operating frequency||47 – 64Hz|
|Output voltage||230 +/- 4%|
|Overload||10 seconds load to 150%|
|Correction Speed / Recovery Speed||500V/s|
|Waveform output||Pure breast|
|Output protection||Short circuit. Low and high voltage protection (optional)|
|Low voltage output protection||230v – 15% = 195v|
|High voltage output protection||230v + 10% = 253v|
|Cooling||Natural air / Fan|
|Measurement and Image||LED display for output and input voltage|
|Continuous operating time at full load||0 – 105%|
|Continuous load <105%||<7 / 24|
|Efficiency under load||>96%|
|Efficiency under load||4 x 3 = 12 steps|
|By-Pass||Automatic and Manual|
|Ambient operating temperature||-40ºC / 55ºC|
|Temperature + 25ºC – Relative humidity||<96%|
|Acoustic level||<50db (1m)|
|Measurements (cm)||22 x 17 x 9||33 x 24 x 14|
The relay stabilizers have a display where we can observe the mains voltage and that delivered by the equipment, and can be used in household appliances.